To go with the EZ Rider’s good looks are many needed standard features including a rear drop down ramp door with extension flap, 36” side door with dead bolt lock, tie down rings, wheel chock(s), and a rear beavertail. The low body profile of the EZ Rider assures ease of entry while providing reduced wind resistance compared to other trailers. The standard overall height of the EZ Rider allows passage through a standard 7’ garage door. Structurally the EZ Rider is second to none! Boasting standard features such as Rubber ride torsion axles, trailer rated radial tires, floor cross members and wall posts 16” O.C., and .030 gauge aluminum exterior with baked enamel finish to name a few. If you are looking for an extremely functional motorcycle trailer with tremendous looks, consider the EZ Rider! We think you will agree it is one of the best looking trailers on the road today! All Homesteader enclosed trailers feature our 3 Year Limited Warranty. 

Standard Features

• Low Profile Frame
• Floor Crossmembers 16" O.C.
• D.O.T. Reflective Tape
• Heavy Duty All Steel Framed Body
• 24" Aluminum Treadplate Stoneguard
• Automotive Style Fasteners
• Rear Ramp Door with Spring Assist
• 3 /4" Exterior Grade Plywood Floor
• Sealed Tail Lights
• Ramp Extension Flap
• Automotive Quality Gaskets and Seals
• I.C.C. Lighting
• Beaver Tail

• Premium 3/8" Plywood Sidewall Liner
• Tongue Jack
• ATP on Beavertail
• 15" Trailer Rated Radial Tires
• High Tech Roof Sealant
• 36" Side Door
• Chrome Wheels
• Recessed Door Jambs
• Polished Aluminum Trim Panel on Sides
• Rubber Ride Torflex Axle(s)
• Heavy Duty Exterior Trim
• 2 Dome Lights with Switch
• Breakaway Switch w/charger (tandem models)
• Door Retainer Chain
• Wall Studs 16" O.C.
• Aluminum Fenders

• Rear Stabilizer Support Jacks
• Electric Brakes (tandem models)
• Door Hold Back
• Flow Thru Vent System
• .030 Gauge Aluminum Exterior w/ Baked Enamel Finish
• Deadbolt Entry Lockset
• Exterior Fasteners 4" O.C.
• Floor-Mounted D-Ring Tie Down System
• Aerodynamic Fiberglass Nosecap
• Removable Chrome Wheel Chock(s)
• Aerodynamic Styling

The Challenger goes through stringent measures in manufacturing to insure the quality you expect from Homesteader. Incorporated in each Challenger are the finest materials and components available. Standard features include a heavy duty all steel framed body, floor and wall crossmembers are 24” O.C., ¾” exterior grade plywood flooring, E-Z lube hub axles, a 20 year manufacturer’s limited warranty Galvaloom roof system, and a sleek aerodynamic design that adds style as well as performance. If diversity is what you need, over 50 options are available. Options include various door sizes, roof vent, aluminum treadplate stoneguard, dome light, extra height, Vee-nose front, ramp door with spring assist, and much, much more. So when you are looking for quality, durability, and price look no further than the Homesteader Challenger. There are now 8.5' Challengers too!

• Heavy Duty All Steel Framed Body
• Wall Studs 24" O.C.
• Floor Crossmembers 24" 0.C.
• 14" Trailer Rated Tires/15" On Tandem axle models
• Accu-Lube Hub Axles
• Breakaway Switch w/charger (tandem models)

• Contemporary Style Steel Wheels
• Aluminum Fenders
• Fender Lights
• Exterior Fasteners 6" O.C.
• Aerodynamic Fiberglas Nosecap

• Galvalume Roof w/Manufacturers 20 Year Limited Warranty
• Premium 1/4" Luan Sidewall Liner
• 3/4" Exterior Grade Plywood Floor
• Aerodynamic Styling
• .024 Gauge Aluminum Exterior w/ Baked Enamel Finish

• Automotive Quality Gaskets and Seals
• Sealed Tail Lights
• I.C.C. Lighting
• Tongue Jack

• Electric Brakes (tandem models only, both axles)
• High Tech Roof Sealant
• Recessed Door Frames
• Heavy Duty Exterior Trim